Skip to main content

Eye see you

October 13th 2026

Reachy Mini has joined the eyecult, and now you can too! Turn on face tracking and let it run. No conversation or other interaction required.

Printing the Monster Eye​

Download the STL

This part replaces your existing face plate. It is designed to print "face up." Don't forget to paint out supports to omit the screw holes or else you are going to have a bad time. There are lots of ways this can be improved, but have found 0.2mm speed and snug supports to work well enough. Email me if you are having any trouble.

Painting​

There are a ton of directions you can go with this. Keep it white for a classic Reachy aesthetic, or paint it with a color of your choice. Styles range from 'normal' eyeballs to cat eyes or monster eyes... the limit is your imagination.

Installation​

Remove your existing face plate and camera. Disconnect your camera and transfer it to this new one after it's painted, making sure that your lens has adequate clearance before tightening screws).

Socials​

If you publish photos of your printed monster face, please mention Daniel Ritchie in some way (tag, link back to this page, etc.).

Monster Eye 3D Model License: CC BY-NC 4.0

© 2026 Daniel Ritchie. Free to download, print, and modify for noncommercial purposes. Attribution required.